code-image-backup-public/fastbee
1
0
Fork 0
mirror of https://gitee.com/beecue/fastbee.git synced 2025-12-21 02:15:55 +08:00
Code Issues Packages Projects Releases Wiki Activity

更新硬件SDK

Browse Source
This commit is contained in:
kerwincui
2023-03-04 03:44:56 +08:00
parent dcdf6e1b7c
commit e39d3d2f03
1900 changed files with 663153 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

354
sdk/合宙/air780e/csdk/luatos-soc-2022/project/example_adc/inc/RTE_Device.h Normal file
View File

@@ -0,0 +1,354 @@
#ifndef __RTE_DEVICE_H
#define __RTE_DEVICE_H
#include "ec618.h"
/* Peripheral IO Mode Select, Must Configure First !!!
Note, when receiver works in DMA_MODE, interrupt is also enabled to transfer tailing bytes.
*/
#define POLLING_MODE 0x1
#define DMA_MODE 0x2
#define IRQ_MODE 0x3
#define UNILOG_MODE 0x4
#define RTE_UART0_TX_IO_MODE UNILOG_MODE
#define RTE_UART0_RX_IO_MODE IRQ_MODE
#define USART0_RX_TRIG_LVL (30)
#define RTE_UART1_TX_IO_MODE DMA_MODE
#define RTE_UART1_RX_IO_MODE DMA_MODE
#define RTE_UART2_TX_IO_MODE POLLING_MODE
#define RTE_UART2_RX_IO_MODE DMA_MODE
#define RTE_SPI0_IO_MODE POLLING_MODE
#define RTE_SPI1_IO_MODE POLLING_MODE
#define RTE_I2C0_IO_MODE POLLING_MODE
#define RTE_I2C1_IO_MODE POLLING_MODE
// I2C0 (Inter-integrated Circuit Interface) [Driver_I2C0]
// Configuration settings for Driver_I2C0 in component ::Drivers:I2C
#define RTE_I2C0 1
// { PAD_PIN28}, // 0 : gpio13 / 2 : I2C0 SCL
// { PAD_PIN27}, // 0 : gpio12 / 2 : I2C0 SDA
#define RTE_I2C0_SCL_BIT 28 // AUDIO use 28
#define RTE_I2C0_SCL_FUNC PAD_MUX_ALT2
#define RTE_I2C0_SDA_BIT 27 // AUDIO use 27
#define RTE_I2C0_SDA_FUNC PAD_MUX_ALT2
// DMA
// Tx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_I2C0_DMA_TX_EN 0
#define RTE_I2C0_DMA_TX_REQID DMA_REQUEST_I2C0_TX
// Rx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_I2C0_DMA_RX_EN 0
#define RTE_I2C0_DMA_RX_REQID DMA_REQUEST_I2C0_RX
// I2C1 (Inter-integrated Circuit Interface) [Driver_I2C1]
// Configuration settings for Driver_I2C1 in component ::Drivers:I2C
#define RTE_I2C1 1
// { PAD_PIN20}, // 0 : gpio5 / 2 : I2C1 SCL
// { PAD_PIN19}, // 0 : gpio4 / 2 : I2C1 SDA
#define RTE_I2C1_SCL_BIT 20
#define RTE_I2C1_SCL_FUNC PAD_MUX_ALT2
#define RTE_I2C1_SDA_BIT 19
#define RTE_I2C1_SDA_FUNC PAD_MUX_ALT2
// DMA
// Tx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_I2C1_DMA_TX_EN 1
#define RTE_I2C1_DMA_TX_REQID DMA_REQUEST_I2C1_TX
// Rx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_I2C1_DMA_RX_EN 1
#define RTE_I2C1_DMA_RX_REQID DMA_REQUEST_I2C1_RX
// UART0 (Universal asynchronous receiver transmitter) [Driver_USART0]
// Configuration settings for Driver_USART0 in component ::Drivers:USART
#define RTE_UART0_CTS_PIN_EN 0
#define RTE_UART0_RTS_PIN_EN 0
// { PAD_PIN27}, // 0 : gpio12 / 3 : UART0 RTSn
// { PAD_PIN28}, // 0 : gpio13 / 3 : UART0 CTSn
// { PAD_PIN29}, // 0 : gpio14 / 3 : UART0 RXD
// { PAD_PIN30}, // 0 : gpio15 / 3 : UART0 TXD
#define RTE_UART0_RTS_BIT 27
#define RTE_UART0_RTS_FUNC PAD_MUX_ALT3
#define RTE_UART0_CTS_BIT 28
#define RTE_UART0_CTS_FUNC PAD_MUX_ALT3
#define RTE_UART0_RX_BIT 29
#define RTE_UART0_RX_FUNC PAD_MUX_ALT3
#define RTE_UART0_TX_BIT 30
#define RTE_UART0_TX_FUNC PAD_MUX_ALT3
// DMA
// Tx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_UART0_DMA_TX_REQID DMA_REQUEST_USART0_TX
// Rx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_UART0_DMA_RX_REQID DMA_REQUEST_USART0_RX
// UART1 (Universal asynchronous receiver transmitter) [Driver_USART1]
// Configuration settings for Driver_USART1 in component ::Drivers:USART
#define RTE_UART1_CTS_PIN_EN 0
#define RTE_UART1_RTS_PIN_EN 0
// { PAD_PIN31}, // 0 : gpio16 / 1 : UART1 RTS
// { PAD_PIN32}, // 0 : gpio17 / 1 : UART1 CTS
// { PAD_PIN33}, // 0 : gpio18 / 1 : UART1 RXD
// { PAD_PIN34}, // 0 : gpio19 / 1 : UART1 TXD
#define RTE_UART1_RTS_BIT 31
#define RTE_UART1_RTS_FUNC PAD_MUX_ALT1
#define RTE_UART1_CTS_BIT 32
#define RTE_UART1_CTS_FUNC PAD_MUX_ALT1
#define RTE_UART1_RX_BIT 33
#define RTE_UART1_RX_FUNC PAD_MUX_ALT1
#define RTE_UART1_TX_BIT 34
#define RTE_UART1_TX_FUNC PAD_MUX_ALT1
// DMA
// Tx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_UART1_DMA_TX_REQID DMA_REQUEST_USART1_TX
// Rx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_UART1_DMA_RX_REQID DMA_REQUEST_USART1_RX
// UART2 (Universal asynchronous receiver transmitter) [Driver_USART2]
// Configuration settings for Driver_USART2 in component ::Drivers:USART
#define RTE_UART2_CTS_PIN_EN 0
#define RTE_UART2_RTS_PIN_EN 0
// { PAD_PIN25}, // 0 : gpio10 / 3 : UART2 RXD
// { PAD_PIN26}, // 0 : gpio11 / 3 : UART2 TXD
#define RTE_UART2_RX_BIT 25
#define RTE_UART2_RX_FUNC PAD_MUX_ALT3
#define RTE_UART2_TX_BIT 26
#define RTE_UART2_TX_FUNC PAD_MUX_ALT3
// DMA
// Tx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_UART2_DMA_TX_REQID DMA_REQUEST_USART2_TX
// Rx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_UART2_DMA_RX_REQID DMA_REQUEST_USART2_RX
// SPI0 (Serial Peripheral Interface) [Driver_SPI0]
// Configuration settings for Driver_SPI0 in component ::Drivers:SPI
#define RTE_SPI0 1
// { PAD_PIN23}, // 0 : gpio8 / 1 : SPI0 SSn
// { PAD_PIN24}, // 0 : gpio9 / 1 : SPI0 MOSI
// { PAD_PIN25}, // 0 : gpio10 / 1 : SPI0 MISO
// { PAD_PIN26}, // 0 : gpio11 / 1 : SPI0 SCLK
#define RTE_SPI0_SSN_BIT 23
#define RTE_SPI0_SSN_FUNC PAD_MUX_ALT1
#define RTE_SPI0_MOSI_BIT 24
#define RTE_SPI0_MOSI_FUNC PAD_MUX_ALT1
#define RTE_SPI0_MISO_BIT 25
#define RTE_SPI0_MISO_FUNC PAD_MUX_ALT1
#define RTE_SPI0_SCLK_BIT 26
#define RTE_SPI0_SCLK_FUNC PAD_MUX_ALT1
#define RTE_SPI0_SSN_GPIO_INSTANCE 0
#define RTE_SPI0_SSN_GPIO_INDEX 8
// DMA
// Tx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_SPI0_DMA_TX_REQID DMA_REQUEST_SPI0_TX
// Rx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_SPI0_DMA_RX_REQID DMA_REQUEST_SPI0_RX
// SPI1 (Serial Peripheral Interface) [Driver_SPI1]
// Configuration settings for Driver_SPI1 in component ::Drivers:SPI
#define RTE_SPI1 0
// { PAD_PIN27}, // 0 : gpio12 / 1 : SPI1 SSn
// { PAD_PIN28}, // 0 : gpio13 / 1 : SPI1 MOSI
// { PAD_PIN29}, // 0 : gpio14 / 1 : SPI1 MISO
// { PAD_PIN30}, // 0 : gpio15 / 1 : SPI1 SCLK
// { PAD_PIN31}, // 0 : gpio16 / 4 : SPI1 SSn1
#define RTE_SPI1_SSN_BIT 27
#define RTE_SPI1_SSN_FUNC PAD_MUX_ALT1
#define RTE_SPI1_MOSI_BIT 28
#define RTE_SPI1_MOSI_FUNC PAD_MUX_ALT1
#define RTE_SPI1_MISO_BIT 29
#define RTE_SPI1_MISO_FUNC PAD_MUX_ALT1
#define RTE_SPI1_SCLK_BIT 30
#define RTE_SPI1_SCLK_FUNC PAD_MUX_ALT1
#define RTE_SPI1_SSN_GPIO_INSTANCE 0
#define RTE_SPI1_SSN_GPIO_INDEX 12
#define RTE_SPI1_SSN1_BIT 31
#define RTE_SPI1_SSN1_FUNC PAD_MUX_ALT4
// DMA
// Tx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_SPI1_DMA_TX_REQID DMA_REQUEST_SPI1_TX
// Rx
// Channel <0=>0 <1=>1 <2=>2 <3=>3 <4=>4 <5=>5 <6=>6 <7=>7
#define RTE_SPI1_DMA_RX_REQID DMA_REQUEST_SPI1_RX
// PWM0 Controller [Driver_PWM0]
// Configuration settings for Driver_PWM0 in component ::Drivers:PWM
#define RTE_PWM 1
#define EFUSE_INIT_MODE POLLING_MODE
#define L2CTLS_INIT_MODE POLLING_MODE
#define FLASH_BARE_RW_MODE 1
#define RTE_UART0 1
#define RTE_UART1 1
#define RTE_UART2 0
/* to enable external thermal */
#define EXTERNAL_NTC_EXIST 0
#if (RTE_UART1 == 1)
#define UART1_DTR_PAD_INDEX 26 // GPIO11
#define UART1_DTR_GPIO_INSTANCE 0
#define UART1_DTR_GPIO_PIN 11
#define UART1_RI_PAD_INDEX 44 // AONIO 4 = GPIO24
#define UART1_RI_GPIO_INSTANCE 1
#define UART1_RI_GPIO_PIN 8
#define UART1_RI_PWM_INSTANCE 1
#define UART1_RI_PWM_CLK_ID FCLK_TIMER1
#define UART1_RI_PWM_CLK_SEL FCLK_TIMER1_SEL_26M
#define UART1_DCD_PAD_INDEX 45 // AONIO 5 = GPIO25
#define UART1_DCD_GPIO_INSTANCE 1
#define UART1_DCD_GPIO_PIN 9
#endif
#if (RTE_UART2 == 1)
#define UART2_DTR_PAD_INDEX 25 // GPIO10
#define UART2_DTR_GPIO_INSTANCE 0
#define UART2_DTR_GPIO_PIN 10
#define UART2_RI_PAD_INDEX 43 // AONIO 3 = GPIO23
#define UART2_RI_GPIO_INSTANCE 1
#define UART2_RI_GPIO_PIN 7
#define UART2_RI_PWM_INSTANCE 0
#define UART2_RI_PWM_CLK_ID FCLK_TIMER0
#define UART2_RI_PWM_CLK_SEL FCLK_TIMER0_SEL_26M
#define UART2_DCD_PAD_INDEX 47 // AONIO 7 = GPIO27
#define UART2_DCD_GPIO_INSTANCE 1
#define UART2_DCD_GPIO_PIN 11
#endif
#define NETLIGHT_PAD_INDEX 46 // AONIO 6 = GPIO26
#define NETLIGHT_PAD_ALT_FUNC PAD_MUX_ALT5
#define NETLIGHT_PWM_INSTANCE 3
//USIM1 OPTION1
#define USIM1_URST_OP1_PAD_INDEX 19 // GPIO4
#define USIM1_URST_OP1_GPIO_INSTANCE 0
#define USIM1_URST_OP1_GPIO_PIN 4
#define USIM1_UCLK_OP1_PAD_INDEX 20 // GPIO5
#define USIM1_UCLK_OP1_GPIO_INSTANCE 0
#define USIM1_UCLK_OP1_GPIO_PIN 5
#define USIM1_UIO_OP1_PAD_INDEX 21 // GPIO6
#define USIM1_UIO_OP1_GPIO_INSTANCE 0
#define USIM1_UIO_OP1_GPIO_PIN 6
//USIM1 OPTION2
#define USIM1_UIO_OP2_PAD_INDEX 27 // GPIO12
#define USIM1_UIO_OP2_GPIO_INSTANCE 0
#define USIM1_UIO_OP2_GPIO_PIN 12
#define USIM1_URST_OP2_PAD_INDEX 28 // GPIO13
#define USIM1_URST_OP2_GPIO_INSTANCE 0
#define USIM1_URST_OP2_GPIO_PIN 13
#define USIM1_UCLK_OP2_PAD_INDEX 29 // GPIO14
#define USIM1_UCLK_OP2_GPIO_INSTANCE 0
#define USIM1_UCLK_OP2_GPIO_PIN 14
//USIM1 clock latched by AONIO, for example, use AONIO-6 test on EVB
#define AONIO_6_PAD_INDEX 46 // AONIO 6 = GPIO26
#define AONIO_6_GPIO_INSTANCE 1
#define AONIO_6_GPIO_PIN 10
#define RTE_CSPI0 0
#define RTE_CSPI0_MCLK_PAD_ADDR 39
#define RTE_CSPI0_MCLK_FUNC PAD_MUX_ALT1
#define RTE_CSPI0_PCLK_PAD_ADDR 35
#define RTE_CSPI0_PCLK_FUNC PAD_MUX_ALT1
#define RTE_CSPI0_CS_PAD_ADDR 36
#define RTE_CSPI0_CS_FUNC PAD_MUX_ALT1
#define RTE_CSPI0_SDO0_PAD_ADDR 37
#define RTE_CSPI0_SDO0_FUNC PAD_MUX_ALT1
#define RTE_CSPI0_SDO1_PAD_ADDR 38
#define RTE_CSPI0_SDO1_FUNC PAD_MUX_ALT1
// DMA CSPI0 Request ID
#define RTE_CSPI0_DMA_RX_REQID DMA_REQUEST_I2S0_RX
// CSPI1 Configuration
#define RTE_CSPI1 1
#define RTE_CSPI1_MCLK_PAD_ADDR 18
#define RTE_CSPI1_MCLK_FUNC PAD_MUX_ALT1
#define RTE_CSPI1_PCLK_PAD_ADDR 19
#define RTE_CSPI1_PCLK_FUNC PAD_MUX_ALT1
#define RTE_CSPI1_CS_PAD_ADDR 20
#define RTE_CSPI1_CS_FUNC PAD_MUX_ALT1
#define RTE_CSPI1_SDO0_PAD_ADDR 21
#define RTE_CSPI1_SDO0_FUNC PAD_MUX_ALT1
#define RTE_CSPI1_SDO1_PAD_ADDR 22
#define RTE_CSPI1_SDO1_FUNC PAD_MUX_ALT1
// DMA CSPI1 Request ID
#define RTE_CSPI1_DMA_RX_REQID DMA_REQUEST_I2S1_RX
#endif /* __RTE_DEVICE_H */

91
sdk/合宙/air780e/csdk/luatos-soc-2022/project/example_adc/src/example_main.c Normal file
View File

@@ -0,0 +1,91 @@
/*
* Copyright (c) 2022 OpenLuat & AirM2M
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#include "common_api.h"
#include "luat_rtos.h"
#include "luat_debug.h"
#include "luat_adc.h"
luat_rtos_task_handle adc_task_handle;
static void task_test_adc(void *param)
{
int val, val2;
// adc0和adc1的说明如下：
// 1、adc引脚允许输入的最大电压是3.4V
// 2、如果采用内部分压，外部不分压的方式，软件上通过调用luat_adc_ctrl接口来设置量程，支持1.2V、1.4V、1.6、1.9、2.4、2.7、3.2、3.8V几种量程；
// 3、如果采用外部分压，内部不分压的方式，软件上通过调用luat_adc_ctrl接口来设置量程为1.2V；
// 4、不建议同时启动内部分压和外部分压的方式，这样的误差会变大
// 外部输入电压，超过3.4v的话：
// 只能采用外部分压，内部不分压的方式，软件上通过调用luat_adc_ctrl接口来设置量程为1.2V；
// 外部输入电压，不超过3.4V的话：
// 1、可以采用外部分压，内部不分压的方式，软件上通过调用luat_adc_ctrl接口来设置量程为1.2V；
// 2、也可以采用内部分压，外部不分压的方式，软件上通过调用luat_adc_ctrl接口来设置量程，设置的量程大于等于实际输入的最大电压，选择最接近的量程即可；
// 从硬件成本考虑，推荐第2种；
// 从测量精确度来看，第2种方式，12bit表示设置的最大量程，最大量程/4096为测量精度；第1种方式，根据外部硬件电路，自行计算对比下；
// 内外部分压选择其中一种即可；不能外部分压时，才选择内部分压；
// 如果采用外部分压，建议一步到位，外部分压后输入电压在0.1-1.2V范围（内部使用直通模式，不再分压），越靠近1.2V越好，精度越高。
// 如果采用内部分压，在满足测量要求的前提下，配置的量程越靠近1.2V越好，精度越高。
// adc默认打开了内部分压，配置的量程为3.8V；
// 以下三行注释掉的代码设置adc0的量程为1.2V，关闭了内部分压；建议用户采用外部分压；
// 如果采用外部分压方式，用户可根据自己的需要打开以下三行代码；
// luat_adc_ctrl_param_t ctrl_param;
// ctrl_param.range = LUAT_ADC_AIO_RANGE_1_2;
// luat_adc_ctrl(0, LUAT_ADC_SET_GLOBAL_RANGE, ctrl_param);
// LUAT_ADC_CH_CPU和LUAT_ADC_CH_VBAT的说明如下：
// LUAT_ADC_CH_CPU被芯片内部用来检测温度，仅支持软件上open、read和close操作，用户不能做其他用途使用；
// LUAT_ADC_CH_VBAT被芯片内部用来检测VBAT电压，仅支持软件上open、read和close操作，用户不能做其他用途使用；
luat_adc_open(0 , NULL);
luat_adc_open(1 , NULL);
luat_adc_open(LUAT_ADC_CH_CPU, NULL);
luat_adc_open(LUAT_ADC_CH_VBAT, NULL);
while (1)
{
luat_rtos_task_sleep(1000);
luat_adc_read(0 , &val, &val2);
LUAT_DEBUG_PRINT("adc0: adc 原始值 %d, 电压 %d 微伏",val, val2);
luat_adc_read(1 , &val, &val2);
LUAT_DEBUG_PRINT("adc1: adc 原始值 %d, 电压 %d 微伏",val, val2);
luat_adc_read(LUAT_ADC_CH_CPU, &val, &val2);
LUAT_DEBUG_PRINT("temp: adc 原始值 %d, %d 摄氏度",val, val2);
luat_adc_read(LUAT_ADC_CH_VBAT, &val, &val2);
LUAT_DEBUG_PRINT("vbat: adc 原始值 %d, 电压 %d 毫伏",val, val2);
}
}
static void task_demo_adc(void)
{
luat_rtos_task_create(&adc_task_handle, 1024, 20, "adc", task_test_adc, NULL, NULL);
}
INIT_TASK_EXPORT(task_demo_adc,"1");

21
sdk/合宙/air780e/csdk/luatos-soc-2022/project/example_adc/xmake.lua Normal file
View File

@@ -0,0 +1,21 @@
local TARGET_NAME = "example_adc"
local LIB_DIR = "$(buildir)/".. TARGET_NAME .. "/"
local LIB_NAME = "lib" .. TARGET_NAME .. ".a "
target(TARGET_NAME)
set_kind("static")
set_targetdir(LIB_DIR)
--加入代码和头文件
add_includedirs("./inc",{public = true})
add_files("./src/*.c",{public = true})
--路径可以随便写,可以加任意路径的代码,下面代码等效上方代码
-- add_includedirs(SDK_TOP .. "project/" .. TARGET_NAME .. "/inc",{public = true})
-- add_files(SDK_TOP .. "project/" .. TARGET_NAME .. "/src/*.c",{public = true})
--可以继续增加add_includedirs和add_files
--自动链接
LIB_USER = LIB_USER .. SDK_TOP .. LIB_DIR .. LIB_NAME .. " "
--甚至可以加入自己的库
target_end()