添加智能灯固件代码

firmware/esp-idf/wumei-smart-firmware/components/bus/include/i2s_lcd_driver.h

@@ -0,0 +1,125 @@
+// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#ifndef   __I2S_LCD_DRIVER_H__
+#define   __I2S_LCD_DRIVER_H__
+
+#include "driver/i2s.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#define LCD_CMD_LEV   (0)
+#define LCD_DATA_LEV  (1)
+
+typedef void * i2s_lcd_handle_t; /** Handle of i2s lcd driver */
+
+/**
+ * @brief Configuration of i2s lcd mode
+ * 
+ */
+typedef struct {
+    int8_t data_width;           /*!< Parallel data width, 16bit or 8bit available */
+    int8_t pin_data_num[16];     /*!< Parallel data output IO*/
+    int8_t pin_num_cs;           /*!< CS io num */
+    int8_t pin_num_wr;           /*!< Write clk io*/
+    int8_t pin_num_rs;           /*!< RS io num */
+    int clk_freq;                /*!< I2s clock frequency */
+    i2s_port_t i2s_port;         /*!< I2S port number */
+    bool swap_data;              /*!< Swap the 2 bytes of RGB565 color */
+    uint32_t buffer_size;        /*!< DMA buffer size */
+} i2s_lcd_config_t;
+
+/**
+ * @brief Initilize i2s lcd driver. 
+ *
+ * @param config configuration of i2s
+ *
+ * @return  A handle to the created i2s lcd driver, or NULL in case of error.
+ */
+i2s_lcd_handle_t i2s_lcd_driver_init(const i2s_lcd_config_t *config);
+
+/**
+ * @brief Deinit i2s lcd driver. 
+ * 
+ * @param handle i2s lcd driver handle to deinitilize
+ * 
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_INVALID_ARG handle is invalid
+ */
+esp_err_t i2s_lcd_driver_deinit(i2s_lcd_handle_t handle);
+
+/**
+ * @brief Write a data to LCD
+ * 
+ * @param handle i2s lcd driver handle
+ * @param data Data to write
+ * 
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_INVALID_ARG handle is invalid
+ */
+esp_err_t i2s_lcd_write_data(i2s_lcd_handle_t handle, uint16_t data);
+
+/**
+ * @brief Write a command to LCD
+ * 
+ * @param handle Handle of i2s lcd driver
+ * @param cmd command to write
+ * 
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_INVALID_ARG handle is invalid
+ */
+esp_err_t i2s_lcd_write_cmd(i2s_lcd_handle_t handle, uint16_t cmd);
+
+/**
+ * @brief Write block data to LCD
+ * 
+ * @param handle  Handle of i2s lcd driver
+ * @param data Pointer of data
+ * @param length length of data
+ * 
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_INVALID_ARG handle is invalid
+ */
+esp_err_t i2s_lcd_write(i2s_lcd_handle_t handle, const uint8_t *data, uint32_t length);
+
+/**
+ * @brief acquire a lock
+ * 
+ * @param handle  Handle of i2s lcd driver
+ * 
+ * @return Always return ESP_OK
+ */
+esp_err_t i2s_lcd_acquire(i2s_lcd_handle_t handle);
+
+/**
+ * @brief release a lock
+ * 
+ * @param handle  Handle of i2s lcd driver
+ * 
+ * @return Always return ESP_OK
+ */
+esp_err_t i2s_lcd_release(i2s_lcd_handle_t handle);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif