添加智能灯固件代码

firmware/esp-idf/wumei-smart-firmware/components/button/include/button_adc.h

@@ -0,0 +1,79 @@
+// Copyright 2020 Espressif Systems (Shanghai) Co. Ltd.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#ifndef _IOT_BUTTON_ADC_H_
+#define _IOT_BUTTON_ADC_H_
+
+#include "driver/gpio.h"
+#include "driver/adc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ADC_BUTTON_COMBINE(channel, index) ((channel)<<8 | (index))
+#define ADC_BUTTON_SPLIT_INDEX(data) ((uint32_t)(data)&0xff)
+#define ADC_BUTTON_SPLIT_CHANNEL(data) (((uint32_t)(data) >> 8) & 0xff)
+
+/**
+ * @brief adc button configuration
+ * 
+ */
+typedef struct {
+    adc1_channel_t adc_channel;  /**< Channel of ADC */
+    uint8_t button_index;        /**< button index on the channel */
+    uint16_t min;                /**< min voltage in mv corresponding to the button */
+    uint16_t max;                /**< max voltage in mv corresponding to the button */
+} button_adc_config_t;
+
+/**
+ * @brief Initialize gpio button
+ * 
+ * @param config pointer of configuration struct
+ * 
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_INVALID_ARG   Arguments is NULL.
+ *      - ESP_ERR_NOT_SUPPORTED Arguments out of range.
+ *      - ESP_ERR_INVALID_STATE State is error.
+ */
+esp_err_t button_adc_init(const button_adc_config_t *config);
+
+/**
+ * @brief Deinitialize gpio button
+ * 
+ * @param channel ADC channel
+ * @param button_index Button index on the channel
+ * 
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_INVALID_ARG   Arguments is invalid.
+ */
+esp_err_t button_adc_deinit(adc1_channel_t channel, int button_index);
+
+/**
+ * @brief Get the adc button level
+ * 
+ * @param button_index It is compressed by ADC channel and button index, use the macro ADC_BUTTON_COMBINE to generate. It will be treated as a uint32_t variable.
+ * 
+ * @return 
+ *      - 0 Not pressed
+ *      - 1 Pressed
+ */
+uint8_t button_adc_get_key_level(void *button_index);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

firmware/esp-idf/wumei-smart-firmware/components/button/include/button_gpio.h

@@ -0,0 +1,65 @@
+// Copyright 2020 Espressif Systems (Shanghai) Co. Ltd.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#ifndef _IOT_BUTTON_GPIO_H_
+#define _IOT_BUTTON_GPIO_H_
+
+#include "driver/gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief gpio button configuration
+ * 
+ */
+typedef struct {
+    int32_t gpio_num;
+    uint8_t active_level;
+} button_gpio_config_t;
+
+/**
+ * @brief Initialize gpio button
+ * 
+ * @param config pointer of configuration struct
+ * 
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_INVALID_ARG   Arguments is NULL.
+ */
+esp_err_t button_gpio_init(const button_gpio_config_t *config);
+
+/**
+ * @brief Deinitialize gpio button
+ * 
+ * @param gpio_num gpio number of button
+ * 
+ * @return Always return ESP_OK
+ */
+esp_err_t button_gpio_deinit(int gpio_num);
+
+/**
+ * @brief Get current level on button gpio
+ * 
+ * @param gpio_num gpio number of button, it will be treated as a uint32_t variable.
+ * 
+ * @return Level on gpio
+ */
+uint8_t button_gpio_get_key_level(void *gpio_num);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

firmware/esp-idf/wumei-smart-firmware/components/button/include/iot_button.h

@@ -0,0 +1,131 @@
+// Copyright 2020 Espressif Systems (Shanghai) Co. Ltd.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#ifndef _IOT_BUTTON_H_
+#define _IOT_BUTTON_H_
+
+#include "button_adc.h"
+#include "button_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef void (* button_cb_t)(void *);
+typedef void *button_handle_t;
+
+/**
+ * @brief Button events
+ *
+ */
+typedef enum {
+    BUTTON_PRESS_DOWN = 0,
+    BUTTON_PRESS_UP,
+    BUTTON_PRESS_REPEAT,
+    BUTTON_SINGLE_CLICK,
+    BUTTON_DOUBLE_CLICK,
+    BUTTON_LONG_PRESS_START,
+    BUTTON_LONG_PRESS_HOLD,
+    BUTTON_EVENT_MAX,
+    BUTTON_NONE_PRESS,
+} button_event_t;
+
+/**
+ * @brief Supported button type
+ *
+ */
+typedef enum {
+    BUTTON_TYPE_GPIO,
+    BUTTON_TYPE_ADC,
+} button_type_t;
+
+/**
+ * @brief Button configuration
+ *
+ */
+typedef struct {
+    button_type_t type;                           /**< button type, The corresponding button configuration must be filled */
+    union {
+        button_gpio_config_t gpio_button_config; /**< gpio button configuration */
+        button_adc_config_t adc_button_config;   /**< adc button configuration */
+    }; /**< button configuration */
+} button_config_t;
+
+/**
+ * @brief Create a button
+ *
+ * @param config pointer of button configuration, must corresponding the button type
+ *
+ * @return A handle to the created button, or NULL in case of error.
+ */
+button_handle_t iot_button_create(const button_config_t *config);
+
+/**
+ * @brief Delete a button
+ *
+ * @param btn_handle A button handle to delete
+ *
+ * @return
+ *      - ESP_OK  Success
+ *      - ESP_FAIL Failure
+ */
+esp_err_t iot_button_delete(button_handle_t btn_handle);
+
+/**
+ * @brief Register the button event callback function.
+ *
+ * @param btn_handle A button handle to register
+ * @param event Button event
+ * @param cb Callback function.
+ *
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_INVALID_ARG   Arguments is invalid.
+ */
+esp_err_t iot_button_register_cb(button_handle_t btn_handle, button_event_t event, button_cb_t cb);
+
+/**
+ * @brief Unregister the button event callback function.
+ *
+ * @param btn_handle A button handle to unregister
+ * @param event Button event
+ *
+ * @return
+ *      - ESP_OK on success
+ *      - ESP_ERR_INVALID_ARG   Arguments is invalid.
+ */
+esp_err_t iot_button_unregister_cb(button_handle_t btn_handle, button_event_t event);
+
+/**
+ * @brief Get button event
+ *
+ * @param btn_handle Button handle
+ *
+ * @return Current button event. See button_event_t
+ */
+button_event_t iot_button_get_event(button_handle_t btn_handle);
+
+/**
+ * @brief Get button repeat times
+ *
+ * @param btn_handle Button handle
+ *
+ * @return button pressed times. For example, double-click return 2, triple-click return 3, etc.
+ */
+uint8_t iot_button_get_repeat(button_handle_t btn_handle);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif