mirror of
https://gitee.com/beecue/fastbee.git
synced 2025-12-19 17:35:54 +08:00
添加智能灯固件代码
This commit is contained in:
kerwincui
@@ -0,0 +1,3 @@
|
||||
idf_component_register(SRCS "ethernet_example_main.c"
|
||||
INCLUDE_DIRS ".")
|
||||
|
||||
@@ -0,0 +1,134 @@
|
||||
menu "Example Configuration"
|
||||
choice EXAMPLE_USE_ETHERNET
|
||||
prompt "Ethernet Type"
|
||||
default EXAMPLE_USE_INTERNAL_ETHERNET if IDF_TARGET_ESP32
|
||||
default EXAMPLE_USE_DM9051 if !IDF_TARGET_ESP32
|
||||
help
|
||||
Select which kind of Ethernet will be used in the example.
|
||||
|
||||
config EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
depends on IDF_TARGET_ESP32
|
||||
select ETH_USE_ESP32_EMAC
|
||||
bool "Internal EMAC"
|
||||
help
|
||||
Select internal Ethernet MAC controller.
|
||||
|
||||
config EXAMPLE_USE_DM9051
|
||||
bool "DM9051 Module"
|
||||
select ETH_USE_SPI_ETHERNET
|
||||
select ETH_SPI_ETHERNET_DM9051
|
||||
help
|
||||
Select external SPI-Ethernet module (DM9051).
|
||||
|
||||
endchoice
|
||||
|
||||
if EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
choice EXAMPLE_ETH_PHY_MODEL
|
||||
prompt "Ethernet PHY Device"
|
||||
default EXAMPLE_ETH_PHY_IP101
|
||||
help
|
||||
Select the Ethernet PHY device to use in the example.
|
||||
|
||||
config EXAMPLE_ETH_PHY_IP101
|
||||
bool "IP101"
|
||||
help
|
||||
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
|
||||
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_RTL8201
|
||||
bool "RTL8201/SR8201"
|
||||
help
|
||||
RTL8201F/SR8201F is a single port 10/100Mb Ethernet Transceiver with auto MDIX.
|
||||
Goto http://www.corechip-sz.com/productsview.asp?id=22 for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_LAN8720
|
||||
bool "LAN8720"
|
||||
help
|
||||
LAN8720A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
|
||||
Goto https://www.microchip.com/LAN8720A for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_DP83848
|
||||
bool "DP83848"
|
||||
help
|
||||
DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
|
||||
Goto http://www.ti.com/product/DP83848J for more information about it.
|
||||
endchoice
|
||||
|
||||
config EXAMPLE_ETH_MDC_GPIO
|
||||
int "SMI MDC GPIO number"
|
||||
default 23
|
||||
help
|
||||
Set the GPIO number used by SMI MDC.
|
||||
|
||||
config EXAMPLE_ETH_MDIO_GPIO
|
||||
int "SMI MDIO GPIO number"
|
||||
default 18
|
||||
help
|
||||
Set the GPIO number used by SMI MDIO.
|
||||
endif
|
||||
|
||||
if EXAMPLE_USE_DM9051
|
||||
config EXAMPLE_DM9051_SPI_HOST
|
||||
int "SPI Host Number"
|
||||
range 0 2
|
||||
default 1
|
||||
help
|
||||
Set the SPI host used to communicate with the SPI Ethernet Controller.
|
||||
|
||||
config EXAMPLE_DM9051_SCLK_GPIO
|
||||
int "SPI SCLK GPIO number"
|
||||
range 0 33
|
||||
default 19
|
||||
help
|
||||
Set the GPIO number used by SPI SCLK.
|
||||
|
||||
config EXAMPLE_DM9051_MOSI_GPIO
|
||||
int "SPI MOSI GPIO number"
|
||||
range 0 33
|
||||
default 23
|
||||
help
|
||||
Set the GPIO number used by SPI MOSI.
|
||||
|
||||
config EXAMPLE_DM9051_MISO_GPIO
|
||||
int "SPI MISO GPIO number"
|
||||
range 0 33
|
||||
default 25
|
||||
help
|
||||
Set the GPIO number used by SPI MISO.
|
||||
|
||||
config EXAMPLE_DM9051_CS_GPIO
|
||||
int "SPI CS GPIO number"
|
||||
range 0 33
|
||||
default 22
|
||||
help
|
||||
Set the GPIO number used by SPI CS.
|
||||
|
||||
config EXAMPLE_DM9051_SPI_CLOCK_MHZ
|
||||
int "SPI clock speed (MHz)"
|
||||
range 5 80
|
||||
default 20
|
||||
help
|
||||
Set the clock speed (MHz) of SPI interface.
|
||||
|
||||
config EXAMPLE_DM9051_INT_GPIO
|
||||
int "Interrupt GPIO number"
|
||||
default 4
|
||||
help
|
||||
Set the GPIO number used by DM9051 interrupt.
|
||||
endif
|
||||
|
||||
config EXAMPLE_ETH_PHY_RST_GPIO
|
||||
int "PHY Reset GPIO number"
|
||||
default 5
|
||||
help
|
||||
Set the GPIO number used to reset PHY chip.
|
||||
Set to -1 to disable PHY chip hardware reset.
|
||||
|
||||
config EXAMPLE_ETH_PHY_ADDR
|
||||
int "PHY Address"
|
||||
range 0 31 if EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
range 1 1 if !EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
default 1
|
||||
help
|
||||
Set PHY address according your board schematic.
|
||||
endmenu
|
||||
@@ -0,0 +1,4 @@
|
||||
#
|
||||
# "main" pseudo-component makefile.
|
||||
#
|
||||
# (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.)
|
||||
@@ -0,0 +1,130 @@
|
||||
/* Ethernet Basic Example
|
||||
|
||||
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
||||
|
||||
Unless required by applicable law or agreed to in writing, this
|
||||
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||||
CONDITIONS OF ANY KIND, either express or implied.
|
||||
*/
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "esp_netif.h"
|
||||
#include "esp_eth.h"
|
||||
#include "esp_event.h"
|
||||
#include "esp_log.h"
|
||||
#include "driver/gpio.h"
|
||||
#include "sdkconfig.h"
|
||||
|
||||
static const char *TAG = "eth_example";
|
||||
|
||||
/** Event handler for Ethernet events */
|
||||
static void eth_event_handler(void *arg, esp_event_base_t event_base,
|
||||
int32_t event_id, void *event_data)
|
||||
{
|
||||
uint8_t mac_addr[6] = {0};
|
||||
/* we can get the ethernet driver handle from event data */
|
||||
esp_eth_handle_t eth_handle = *(esp_eth_handle_t *)event_data;
|
||||
|
||||
switch (event_id) {
|
||||
case ETHERNET_EVENT_CONNECTED:
|
||||
esp_eth_ioctl(eth_handle, ETH_CMD_G_MAC_ADDR, mac_addr);
|
||||
ESP_LOGI(TAG, "Ethernet Link Up");
|
||||
ESP_LOGI(TAG, "Ethernet HW Addr %02x:%02x:%02x:%02x:%02x:%02x",
|
||||
mac_addr[0], mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
|
||||
break;
|
||||
case ETHERNET_EVENT_DISCONNECTED:
|
||||
ESP_LOGI(TAG, "Ethernet Link Down");
|
||||
break;
|
||||
case ETHERNET_EVENT_START:
|
||||
ESP_LOGI(TAG, "Ethernet Started");
|
||||
break;
|
||||
case ETHERNET_EVENT_STOP:
|
||||
ESP_LOGI(TAG, "Ethernet Stopped");
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/** Event handler for IP_EVENT_ETH_GOT_IP */
|
||||
static void got_ip_event_handler(void *arg, esp_event_base_t event_base,
|
||||
int32_t event_id, void *event_data)
|
||||
{
|
||||
ip_event_got_ip_t *event = (ip_event_got_ip_t *) event_data;
|
||||
const esp_netif_ip_info_t *ip_info = &event->ip_info;
|
||||
|
||||
ESP_LOGI(TAG, "Ethernet Got IP Address");
|
||||
ESP_LOGI(TAG, "~~~~~~~~~~~");
|
||||
ESP_LOGI(TAG, "ETHIP:" IPSTR, IP2STR(&ip_info->ip));
|
||||
ESP_LOGI(TAG, "ETHMASK:" IPSTR, IP2STR(&ip_info->netmask));
|
||||
ESP_LOGI(TAG, "ETHGW:" IPSTR, IP2STR(&ip_info->gw));
|
||||
ESP_LOGI(TAG, "~~~~~~~~~~~");
|
||||
}
|
||||
|
||||
void app_main(void)
|
||||
{
|
||||
// Initialize TCP/IP network interface (should be called only once in application)
|
||||
ESP_ERROR_CHECK(esp_netif_init());
|
||||
// Create default event loop that running in background
|
||||
ESP_ERROR_CHECK(esp_event_loop_create_default());
|
||||
esp_netif_config_t cfg = ESP_NETIF_DEFAULT_ETH();
|
||||
esp_netif_t *eth_netif = esp_netif_new(&cfg);
|
||||
// Set default handlers to process TCP/IP stuffs
|
||||
ESP_ERROR_CHECK(esp_eth_set_default_handlers(eth_netif));
|
||||
// Register user defined event handers
|
||||
ESP_ERROR_CHECK(esp_event_handler_register(ETH_EVENT, ESP_EVENT_ANY_ID, ð_event_handler, NULL));
|
||||
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_ETH_GOT_IP, &got_ip_event_handler, NULL));
|
||||
|
||||
eth_mac_config_t mac_config = ETH_MAC_DEFAULT_CONFIG();
|
||||
eth_phy_config_t phy_config = ETH_PHY_DEFAULT_CONFIG();
|
||||
phy_config.phy_addr = CONFIG_EXAMPLE_ETH_PHY_ADDR;
|
||||
phy_config.reset_gpio_num = CONFIG_EXAMPLE_ETH_PHY_RST_GPIO;
|
||||
#if CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
mac_config.smi_mdc_gpio_num = CONFIG_EXAMPLE_ETH_MDC_GPIO;
|
||||
mac_config.smi_mdio_gpio_num = CONFIG_EXAMPLE_ETH_MDIO_GPIO;
|
||||
esp_eth_mac_t *mac = esp_eth_mac_new_esp32(&mac_config);
|
||||
#if CONFIG_EXAMPLE_ETH_PHY_IP101
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_ip101(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_RTL8201
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_rtl8201(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_LAN8720
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_lan8720(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_DP83848
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
|
||||
#endif
|
||||
#elif CONFIG_EXAMPLE_USE_DM9051
|
||||
gpio_install_isr_service(0);
|
||||
spi_device_handle_t spi_handle = NULL;
|
||||
spi_bus_config_t buscfg = {
|
||||
.miso_io_num = CONFIG_EXAMPLE_DM9051_MISO_GPIO,
|
||||
.mosi_io_num = CONFIG_EXAMPLE_DM9051_MOSI_GPIO,
|
||||
.sclk_io_num = CONFIG_EXAMPLE_DM9051_SCLK_GPIO,
|
||||
.quadwp_io_num = -1,
|
||||
.quadhd_io_num = -1,
|
||||
};
|
||||
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_DM9051_SPI_HOST, &buscfg, 1));
|
||||
spi_device_interface_config_t devcfg = {
|
||||
.command_bits = 1,
|
||||
.address_bits = 7,
|
||||
.mode = 0,
|
||||
.clock_speed_hz = CONFIG_EXAMPLE_DM9051_SPI_CLOCK_MHZ * 1000 * 1000,
|
||||
.spics_io_num = CONFIG_EXAMPLE_DM9051_CS_GPIO,
|
||||
.queue_size = 20
|
||||
};
|
||||
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_DM9051_SPI_HOST, &devcfg, &spi_handle));
|
||||
/* dm9051 ethernet driver is based on spi driver */
|
||||
eth_dm9051_config_t dm9051_config = ETH_DM9051_DEFAULT_CONFIG(spi_handle);
|
||||
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_DM9051_INT_GPIO;
|
||||
esp_eth_mac_t *mac = esp_eth_mac_new_dm9051(&dm9051_config, &mac_config);
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_dm9051(&phy_config);
|
||||
#endif
|
||||
esp_eth_config_t config = ETH_DEFAULT_CONFIG(mac, phy);
|
||||
esp_eth_handle_t eth_handle = NULL;
|
||||
ESP_ERROR_CHECK(esp_eth_driver_install(&config, ð_handle));
|
||||
/* attach Ethernet driver to TCP/IP stack */
|
||||
ESP_ERROR_CHECK(esp_netif_attach(eth_netif, esp_eth_new_netif_glue(eth_handle)));
|
||||
/* start Ethernet driver state machine */
|
||||
ESP_ERROR_CHECK(esp_eth_start(eth_handle));
|
||||
}
|
||||
Reference in New Issue
Block a user