添加智能灯固件代码

firmware/esp-idf/wumei-smart-firmware/examples/get-started/blink/main/CMakeLists.txt

@@ -0,0 +1,2 @@
+idf_component_register(SRCS "blink.c"
+                    INCLUDE_DIRS ".")

firmware/esp-idf/wumei-smart-firmware/examples/get-started/blink/main/Kconfig.projbuild

@@ -0,0 +1,14 @@
+menu "Example Configuration"
+
+    config BLINK_GPIO
+        int "Blink GPIO number"
+        range 0 34
+        default 5
+        help
+            GPIO number (IOxx) to blink on and off.
+
+            Some GPIOs are used for other purposes (flash connections, etc.) and cannot be used to blink.
+
+            GPIOs 35-39 are input-only so cannot be used as outputs.
+
+endmenu

firmware/esp-idf/wumei-smart-firmware/examples/get-started/blink/main/blink.c

@@ -0,0 +1,41 @@
+/* Blink Example
+
+   This example code is in the Public Domain (or CC0 licensed, at your option.)
+
+   Unless required by applicable law or agreed to in writing, this
+   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
+   CONDITIONS OF ANY KIND, either express or implied.
+*/
+#include <stdio.h>
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "driver/gpio.h"
+#include "sdkconfig.h"
+
+/* Can use project configuration menu (idf.py menuconfig) to choose the GPIO to blink,
+   or you can edit the following line and set a number here.
+*/
+#define BLINK_GPIO CONFIG_BLINK_GPIO
+
+void app_main(void)
+{
+    /* Configure the IOMUX register for pad BLINK_GPIO (some pads are
+       muxed to GPIO on reset already, but some default to other
+       functions and need to be switched to GPIO. Consult the
+       Technical Reference for a list of pads and their default
+       functions.)
+    */
+    gpio_pad_select_gpio(BLINK_GPIO);
+    /* Set the GPIO as a push/pull output */
+    gpio_set_direction(BLINK_GPIO, GPIO_MODE_OUTPUT);
+    while(1) {
+        /* Blink off (output low) */
+	printf("Turning off the LED\n");
+        gpio_set_level(BLINK_GPIO, 0);
+        vTaskDelay(1000 / portTICK_PERIOD_MS);
+        /* Blink on (output high) */
+	printf("Turning on the LED\n");
+        gpio_set_level(BLINK_GPIO, 1);
+        vTaskDelay(1000 / portTICK_PERIOD_MS);
+    }
+}

firmware/esp-idf/wumei-smart-firmware/examples/get-started/blink/main/component.mk

@@ -0,0 +1,4 @@
+#
+# "main" pseudo-component makefile.
+#
+# (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.)