添加智能灯固件代码

firmware/esp-idf/wumei-smart-firmware/examples/wifi/power_save/main/Kconfig.projbuild

@@ -0,0 +1,96 @@
+menu "Example Configuration"
+
+    config EXAMPLE_WIFI_SSID
+        string "WiFi SSID"
+        default "myssid"
+        help
+            SSID (network name) for the example to connect to.
+
+    config EXAMPLE_WIFI_PASSWORD
+        string "WiFi Password"
+        default "mypassword"
+        help
+            WiFi password (WPA or WPA2) for the example to use.
+
+    config EXAMPLE_WIFI_LISTEN_INTERVAL
+        int "WiFi listen interval"
+        default 3
+        help
+            Interval for station to listen to beacon from AP. The unit of listen interval is one beacon interval.
+            For example, if beacon interval is 100 ms and listen interval is 3, the interval for station to listen
+            to beacon is 300 ms.
+
+    choice EXAMPLE_POWER_SAVE_MODE
+        prompt "power save mode"
+        default EXAMPLE_POWER_SAVE_MIN_MODEM
+        help
+            Power save mode for the esp32 to use. Modem sleep mode includes minimum and maximum power save modes.
+            In minimum power save mode, station wakes up every DTIM to receive beacon. Broadcast data will not be
+            lost because it is transmitted after DTIM. However, it can not save much more power if DTIM is short
+            for DTIM is determined by AP.
+            In maximum power save mode, station wakes up every listen interval to receive beacon. Broadcast data
+            may be lost because station may be in sleep state at DTIM time. If listen interval is longer, more power
+            is saved but broadcast data is more easy to lose.
+
+        config EXAMPLE_POWER_SAVE_NONE
+            bool "none"
+        config EXAMPLE_POWER_SAVE_MIN_MODEM
+            bool "minimum modem"
+        config EXAMPLE_POWER_SAVE_MAX_MODEM
+            bool "maximum modem"
+    endchoice
+
+    choice EXAMPLE_MAX_CPU_FREQ
+        prompt "Maximum CPU frequency"
+        default EXAMPLE_MAX_CPU_FREQ_80
+        help
+            Maximum CPU frequency to use for dynamic frequency scaling.
+
+        config EXAMPLE_MAX_CPU_FREQ_80
+            bool "80 MHz"
+        config EXAMPLE_MAX_CPU_FREQ_160
+            bool "160 MHz"
+        config EXAMPLE_MAX_CPU_FREQ_240
+            bool "240 MHz"
+    endchoice
+
+    config EXAMPLE_MAX_CPU_FREQ_MHZ
+        int
+        default 80 if EXAMPLE_MAX_CPU_FREQ_80
+        default 160 if EXAMPLE_MAX_CPU_FREQ_160
+        default 240 if EXAMPLE_MAX_CPU_FREQ_240
+
+
+    choice EXAMPLE_MIN_CPU_FREQ
+        prompt "Minimum CPU frequency"
+        default EXAMPLE_MIN_CPU_FREQ_10M
+        help
+            Minimum CPU frequency to use for dynamic frequency scaling.
+            Should be set to XTAL frequency or XTAL frequency divided by integer.
+
+        config EXAMPLE_MIN_CPU_FREQ_40M
+            bool "40 MHz (use with 40MHz XTAL)"
+            depends on IDF_TARGET_ESP32S2 || ESP32_XTAL_FREQ_40 || ESP32_XTAL_FREQ_AUTO
+        config EXAMPLE_MIN_CPU_FREQ_20M
+            bool "20 MHz (use with 40MHz XTAL)"
+            depends on IDF_TARGET_ESP32S2 || ESP32_XTAL_FREQ_40 || ESP32_XTAL_FREQ_AUTO
+        config EXAMPLE_MIN_CPU_FREQ_10M
+            bool "10 MHz (use with 40MHz XTAL)"
+            depends on IDF_TARGET_ESP32S2 || ESP32_XTAL_FREQ_40 || ESP32_XTAL_FREQ_AUTO
+        config EXAMPLE_MIN_CPU_FREQ_26M
+            bool "26 MHz (use with 26MHz XTAL)"
+            depends on ESP32_XTAL_FREQ_26 || ESP32_XTAL_FREQ_AUTO
+        config EXAMPLE_MIN_CPU_FREQ_13M
+            bool "13 MHz (use with 26MHz XTAL)"
+            depends on ESP32_XTAL_FREQ_26 || ESP32_XTAL_FREQ_AUTO
+    endchoice
+
+    config EXAMPLE_MIN_CPU_FREQ_MHZ
+        int
+        default 40 if EXAMPLE_MIN_CPU_FREQ_40M
+        default 20 if EXAMPLE_MIN_CPU_FREQ_20M
+        default 10 if EXAMPLE_MIN_CPU_FREQ_10M
+        default 26 if EXAMPLE_MIN_CPU_FREQ_26M
+        default 13 if EXAMPLE_MIN_CPU_FREQ_13M
+
+endmenu