mirror of
https://gitee.com/beecue/fastbee.git
synced 2025-12-18 08:55:53 +08:00
添加智能灯固件代码
This commit is contained in:
kerwincui
245
firmware/esp-idf/wumei-smart-firmware/main/common.c
Normal file
245
firmware/esp-idf/wumei-smart-firmware/main/common.c
Normal file
@@ -0,0 +1,245 @@
|
||||
/******************************************************************************
|
||||
* 作者：kerwincui
|
||||
* 时间：2021-06-08
|
||||
* 邮箱：164770707@qq.com
|
||||
* 源码地址：https://gitee.com/kerwincui/wumei-smart
|
||||
* author: kerwincui
|
||||
* create: 2021-06-08
|
||||
* email：164770707@qq.com
|
||||
* source:https://github.com/kerwincui/wumei-smart
|
||||
******************************************************************************/
|
||||
#include "common.h"
|
||||
#include "smart_config.h"
|
||||
#include "led.h"
|
||||
#include "wifi.h"
|
||||
#include "mqtt.h"
|
||||
#include "nvs_storage.h"
|
||||
#include "driver/temp_sensor.h"
|
||||
|
||||
|
||||
char ssid[33]="tp-six"; // wifi的SSID
|
||||
char pwd[65]="clh15108665817"; // wifi的密码
|
||||
char owner_id[64]="1"; // 用户ID
|
||||
|
||||
char open_broken_url[128]=""; // 二次开发mqtt服务器地址
|
||||
char open_account[64]=""; // 二次开发mqtt账号
|
||||
char open_pwd[64]=""; // 二次开发mqtt密码
|
||||
|
||||
uint8_t relay_status=0; // 继电器状态 0-关闭，1-打开
|
||||
uint8_t light_status=0; // 灯的状态 0-关闭 1-打开
|
||||
uint8_t light_mode=0; // 颜色模式 0-固定颜色 1-七彩渐变 2-七彩动感 3-单色渐变 4-白光 5-暖光
|
||||
|
||||
uint8_t is_radar=0; // 是否进入雷达感应
|
||||
uint8_t is_alarm=0; // 是否打开报警
|
||||
uint8_t is_wifi_offline=0; // 是否离线模式
|
||||
uint8_t is_open_certifi=0; // 二次开发是否使用证书
|
||||
uint8_t is_host=1; // 是否托管
|
||||
uint8_t is_rf_control=1; // 是否使用RF遥控
|
||||
uint8_t rf_one_func=1; // 第一个遥控按键功能，1-继电器通断，2-开关灯，开关雷达，4-报警开关，5-智能配网
|
||||
uint8_t rf_two_func=2; // 第二个遥控按键功能
|
||||
uint8_t rf_three_func=3; // 第三个遥控按键功能
|
||||
uint8_t rf_four_func=4; // 第四个遥控按键功能
|
||||
|
||||
uint32_t red=255; // 红色值 0-255
|
||||
uint32_t gree=255; // 绿色值
|
||||
uint32_t blue=0; // 蓝色值
|
||||
uint32_t brightness=100; // 亮度0-100
|
||||
uint32_t light_interval=1000; // 颜色闪烁间隔
|
||||
uint32_t radar_interval=5; // 雷达开灯持续时间,单位秒
|
||||
uint32_t fade_time=100; // 灯渐变时间
|
||||
|
||||
// 全局变量-不需要存储
|
||||
char device_num[13]=""; // 设备编号，mac地址
|
||||
int8_t rssi=-100; // wifi信号强度(信号极好4格[-55—— 0]，信号好3格[-70—— -55]，信号一般2格[-85—— -70]，信号差1格[-100—— -85])
|
||||
uint8_t wifi_status=0; // wifi连接状态：0-未联网，1-已联网
|
||||
uint8_t trigger_source=0; // 触发源：0-无、1-按键、2.手机、3-浏览器、4-射频遥控、5-雷达、6-报警、7-定时
|
||||
uint8_t is_reset=0; // 是否重启
|
||||
uint8_t is_ap=0; // 是否打开AP
|
||||
uint8_t is_rf_learn=0; // 遥控配对
|
||||
uint8_t is_rf_clear=0; // 遥控清码
|
||||
uint8_t is_smart_config=0; // 智能配网
|
||||
float device_temp=0; // 设备温度
|
||||
float air_temperature=0; // 空气温度
|
||||
float air_humidity=0; // 空气湿度
|
||||
|
||||
static const char* TAG = "common";
|
||||
|
||||
|
||||
//关闭继电器
|
||||
void close_relay(void)
|
||||
{
|
||||
ESP_LOGI(TAG, "close relay");
|
||||
gpio_set_level(IO_RELAY, 0);
|
||||
}
|
||||
|
||||
//打开继电器
|
||||
void open_relay(void)
|
||||
{
|
||||
ESP_LOGI(TAG, "open relay");
|
||||
gpio_set_level(IO_RELAY, 1);
|
||||
}
|
||||
|
||||
//设备重启
|
||||
void device_restart(void)
|
||||
{
|
||||
printf("Restarting now...\n");
|
||||
mqtt_stop();
|
||||
esp_wifi_stop();
|
||||
fflush(stdout);
|
||||
esp_restart();
|
||||
}
|
||||
|
||||
// 获取AP中的rssi
|
||||
void get_ap_info(void)
|
||||
{
|
||||
if(wifi_status==1){
|
||||
//获取AP信息
|
||||
wifi_ap_record_t ap_info;
|
||||
esp_wifi_sta_get_ap_info(&ap_info);
|
||||
ESP_LOGI(TAG,"ap signal:%4d\n",ap_info.rssi);
|
||||
rssi=ap_info.rssi;
|
||||
}else{
|
||||
rssi=-110;
|
||||
}
|
||||
}
|
||||
|
||||
// -----------------------------------------------------------------
|
||||
// 函数功能: 字节数组转字符串类型
|
||||
// 函数名称: hexbyte_to_hex_str
|
||||
// 参数1 : src 源字符串
|
||||
// 参数2 : obj 目标字节数组
|
||||
// 说明 : {0x01,0x03,0x03,x04} --> "01020304"
|
||||
// 返回值 : 1 成功
|
||||
// -----------------------------------------------------------------
|
||||
static int hexbyte_to_hex_str (uint8_t *src, char *obj, uint16_t length)
|
||||
{
|
||||
for (int i = 0; i < length; i++)
|
||||
{
|
||||
sprintf (obj, "%02X", src[i]);
|
||||
obj += 2;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
//获取设备mac地址
|
||||
void get_device_num(void)
|
||||
{
|
||||
uint8_t base_mac_addr[6] = {0};
|
||||
esp_err_t ret = ESP_OK;
|
||||
ret=esp_efuse_mac_get_default(base_mac_addr); //获取工厂编程的基本MAC，这是唯一的
|
||||
if (ret != ESP_OK) {
|
||||
ESP_LOGE(TAG, "Failed to get base MAC address from EFUSE BLK0. (%s)", esp_err_to_name(ret));
|
||||
ESP_LOGE(TAG, "Aborting");
|
||||
abort();
|
||||
} else {
|
||||
ESP_LOGI(TAG, "Base MAC Address read from EFUSE BLK0");
|
||||
}
|
||||
//获取基本mac地址
|
||||
ESP_LOGI(TAG, "Using \"0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\" as base MAC address",
|
||||
base_mac_addr[0], base_mac_addr[1], base_mac_addr[2], base_mac_addr[3], base_mac_addr[4], base_mac_addr[5]);
|
||||
|
||||
hexbyte_to_hex_str(base_mac_addr,device_num,sizeof(base_mac_addr));
|
||||
device_num[12]='\0';
|
||||
ESP_LOGI(TAG,"mac address:%s",device_num);
|
||||
|
||||
}
|
||||
|
||||
|
||||
|
||||
//读取spiffs中的证书
|
||||
void read_cert(void)
|
||||
{
|
||||
ESP_LOGI(TAG, "Initializing SPIFFS");
|
||||
|
||||
esp_vfs_spiffs_conf_t conf = {
|
||||
.base_path = "/spiffs",
|
||||
.partition_label = NULL,
|
||||
.max_files = 5,
|
||||
.format_if_mount_failed = true
|
||||
};
|
||||
|
||||
esp_err_t ret = esp_vfs_spiffs_register(&conf);
|
||||
|
||||
if (ret != ESP_OK) {
|
||||
if (ret == ESP_FAIL) {
|
||||
ESP_LOGE(TAG, "Failed to mount or format filesystem");
|
||||
} else if (ret == ESP_ERR_NOT_FOUND) {
|
||||
ESP_LOGE(TAG, "Failed to find SPIFFS partition");
|
||||
} else {
|
||||
ESP_LOGE(TAG, "Failed to initialize SPIFFS (%s)", esp_err_to_name(ret));
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
||||
size_t total = 0, used = 0;
|
||||
ret = esp_spiffs_info(conf.partition_label, &total, &used);
|
||||
if (ret != ESP_OK) {
|
||||
ESP_LOGE(TAG, "Failed to get SPIFFS partition information (%s)", esp_err_to_name(ret));
|
||||
} else {
|
||||
ESP_LOGI(TAG, "Partition size: total: %d, used: %d", total, used);
|
||||
}
|
||||
|
||||
// Open renamed file for reading
|
||||
ESP_LOGI(TAG, "Reading file");
|
||||
FILE* f = fopen("/spiffs/ca_cert.pem", "r");
|
||||
if (f == NULL) {
|
||||
ESP_LOGE(TAG, "Failed to open file for reading");
|
||||
return;
|
||||
}
|
||||
char line[256]={0};
|
||||
char all_line[2048] ={0};
|
||||
printf("sizeof:%d\n",sizeof(line));
|
||||
while(fgets(line, sizeof(all_line), f)!=NULL){
|
||||
strcat(all_line,line);
|
||||
printf("Read from file: '%s'", line);
|
||||
}
|
||||
fclose(f);
|
||||
|
||||
// All done, unmount partition and disable SPIFFS
|
||||
esp_vfs_spiffs_unregister(conf.partition_label);
|
||||
ESP_LOGI(TAG, "SPIFFS unmounted");
|
||||
}
|
||||
|
||||
//设备温度初始化
|
||||
void device_temp_init(void){
|
||||
// 初始化触摸板外围设备，它将启动计时器以运行过滤器
|
||||
ESP_LOGI(TAG, "Initializing Temperature sensor");
|
||||
temp_sensor_config_t temp_sensor = TSENS_CONFIG_DEFAULT();
|
||||
temp_sensor_get_config(&temp_sensor);
|
||||
ESP_LOGI(TAG, "default dac %d, clk_div %d", temp_sensor.dac_offset, temp_sensor.clk_div);
|
||||
temp_sensor.dac_offset = TSENS_DAC_DEFAULT; // 默认: 范围:-10℃ ~ 80℃, 错误 < 1℃.
|
||||
temp_sensor_set_config(temp_sensor);
|
||||
temp_sensor_start();
|
||||
ESP_LOGI(TAG, "Temperature sensor started");
|
||||
temp_sensor_read_celsius(&device_temp);
|
||||
ESP_LOGI(TAG, "Temperature out celsius %f°C", device_temp);
|
||||
}
|
||||
|
||||
// 433接收模块清码
|
||||
void rf_clear_code(void){
|
||||
for(int i=0;i<8;i++)
|
||||
{
|
||||
gpio_set_level(IO_RF_LEARN_KEY,1);
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
gpio_set_level(IO_RF_LEARN_KEY,0);
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
}
|
||||
}
|
||||
|
||||
// 433接收模块对码
|
||||
void rf_learn(void){
|
||||
gpio_set_level(IO_RF_LEARN_KEY,1);
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
gpio_set_level(IO_RF_LEARN_KEY,0);
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user