/****************************************************************************** * 作者：kerwincui * 时间：2021-06-08 * 邮箱：164770707@qq.com * 源码地址：https://gitee.com/kerwincui/wumei-smart * author: kerwincui * create: 2021-06-08 * email：164770707@qq.com * source:https://github.com/kerwincui/wumei-smart ******************************************************************************/ #include "button.h" #include "common.h" #include "smart_config.h" #include "led.h" #include "wifi.h" #include "http_server.h" #include "native_ota.h" #include "mqtt.h" #include "lwip_sntp.h" #include "nvs_storage.h" static const char* TAG = "button"; bool is_open=false; //单击开关按钮(回调函数) static void button_single_click_cb(void* arg) { ESP_EARLY_LOGI(TAG, "tab switch button\n"); if(relay_status==1) { close_relay(); relay_status=0; }else{ open_relay(); relay_status=1; } write_relay_status(); // mqtt发布状态 if(is_wifi_offline==0 && wifi_status==1 ){ publishStatus(); } } //长按开关按钮 static void button_long_press_start_cb(void* arg) { ESP_LOGI(TAG, "begin smargconfig\n"); //蓝灯闪烁 led_rgb_blink(0,0,255,2,0,0,0,0); //智能配网 smart_config_start(); } // 连续短按开关按钮 static void button_press_repeat_cb(void *arg) { ESP_LOGI(TAG, "BUTTON_PRESS_REPEAT[%d]", iot_button_get_repeat((button_handle_t)arg)); uint8_t num=iot_button_get_repeat((button_handle_t)arg); ESP_LOGI(TAG, "press repeat num: %d\n",num); switch (num) { case 7: ESP_LOGI(TAG, "native ota...\n"); led_rgb_blink(255,0,0,2,0,0,0,0); native_ota_start(); break; case 6: //打开/关闭雷达 led_rgb_blink(0,0,255,2,0,6,0,0); is_radar=is_radar==1 ? 0:1; write_is_radar(); break; case 5: //遥控清码 ESP_LOGI(TAG, "rf clear code ...\n"); led_rgb_blink(0,0,255,2,0,5,0,0); is_rf_clear=1; rf_clear_code(); break; case 4: //遥控学习 ESP_LOGI(TAG, "rf learning... \n"); led_rgb_blink(0,0,255,2,0,4,0,0); is_rf_learn=1; rf_learn(); break; case 3: if(is_ap!=1){ // 打开ap ESP_LOGI(TAG, "open access point \n"); is_ap=1; ap_start(); }else{ //重启 device_restart(); } break; case 2: ESP_EARLY_LOGI(TAG, "switch light \n"); light_status=light_status==0?1:0; led_status(); write_light_status(); break; default: break; } // mqtt发布状态 if(is_wifi_offline==0 && wifi_status==1 ){ publishSetting(); publishStatus(); } } void button_start() { printf("before btn init, heap: %d\n", esp_get_free_heap_size()); //初始化继电器引脚 gpio_pad_select_gpio(IO_RELAY); gpio_set_direction(IO_RELAY,GPIO_MODE_OUTPUT); //初始化按键 button_config_t cfg = { .type = BUTTON_TYPE_GPIO, .gpio_button_config = { .gpio_num = IO_SWITCH_BUTTON, .active_level = 0, }, }; button_handle_t gpio_btn = iot_button_create(&cfg); if(NULL == gpio_btn) { ESP_LOGE(TAG, "Button create failed"); } iot_button_register_cb(gpio_btn, BUTTON_SINGLE_CLICK, button_single_click_cb); //短按 iot_button_register_cb(gpio_btn, BUTTON_LONG_PRESS_START, button_long_press_start_cb); //长按 iot_button_register_cb(gpio_btn, BUTTON_PRESS_REPEAT, button_press_repeat_cb); //连续短按 } /************************************* begin RF接收信号 ***************************************/ static void process_rf_func(uint8_t function){ if(function==1){ //打开关闭继电器 ESP_LOGI(TAG, "switch relay\n"); if(relay_status==0){ open_relay(); relay_status=1; }else if(relay_status==1){ close_relay(); relay_status=0; } write_relay_status(); }else if(function==2){ //打开关闭灯 ESP_LOGI(TAG, "switch light\n"); light_status=light_status==0?1:0; led_status(); }else if(function==3){ //打开关闭雷达 ESP_LOGI(TAG, "switch radar\n"); if(is_radar==0){ is_radar=1; }else if(is_radar==1){ is_radar=0; } write_is_radar(); }else if(function==4){ //打开关闭报警 ESP_LOGI(TAG, "switch alarm\n"); if(is_alarm==0){ is_alarm=1; }else if(is_alarm==1){ is_alarm=0; } write_is_alarm(); }else if(function==5){ ESP_LOGI(TAG, "smart config\n"); if(is_smart_config==0){ ESP_LOGI(TAG, "begin smargconfig\n"); // wifi_mqtt_stop(); is_smart_config=1; //蓝灯闪烁 // led_rgb_blink(0,0,255,2,0,0,0,0); //智能配网 smart_config_start(); }else{ is_smart_config=0; ESP_LOGI(TAG, "device restart\n"); device_restart(); } } // mqtt发布状态 if(is_wifi_offline==0 && wifi_status==1 ){ publishStatus(); publishSetting(); } } //RF接收任务 static void rf_receiver_task(void *arg) { ESP_LOGI(TAG, "begin rf receiver"); // uint32_t gpio_num = (uint32_t) arg; while(true) { if(gpio_get_level(IO_RF_RECEIVER_A)==1) { process_rf_func(rf_one_func); }else if(gpio_get_level(IO_RF_RECEIVER_B)==1) { process_rf_func(rf_two_func); }else if(gpio_get_level(IO_RF_RECEIVER_C)==1) { process_rf_func(rf_three_func); }else if(gpio_get_level(IO_RF_RECEIVER_D)==1) { process_rf_func(rf_four_func); } vTaskDelay(pdMS_TO_TICKS(250)); } } void rf_receiver_start(void) { // 初始化射频引脚 gpio_pad_select_gpio(IO_RF_RECEIVER_D); gpio_pad_select_gpio(IO_RF_RECEIVER_C); gpio_pad_select_gpio(IO_RF_RECEIVER_B); gpio_pad_select_gpio(IO_RF_RECEIVER_A); gpio_pad_select_gpio(IO_RF_LEARN_KEY); gpio_set_direction(IO_RF_RECEIVER_D,GPIO_MODE_INPUT); gpio_set_direction(IO_RF_RECEIVER_C,GPIO_MODE_INPUT); gpio_set_direction(IO_RF_RECEIVER_B,GPIO_MODE_INPUT); gpio_set_direction(IO_RF_RECEIVER_A,GPIO_MODE_INPUT); gpio_set_direction(IO_RF_LEARN_KEY,GPIO_MODE_OUTPUT); // gpio_set_pull_mode(IO_RF_RECEIVER_D,GPIO_PULLDOWN_ONLY); // gpio_set_pull_mode(IO_RF_RECEIVER_C,GPIO_PULLDOWN_ONLY); // gpio_set_pull_mode(IO_RF_RECEIVER_B,GPIO_PULLDOWN_ONLY); // gpio_set_pull_mode(IO_RF_RECEIVER_A,GPIO_PULLDOWN_ONLY); //创建接收信号任务 xTaskCreate(rf_receiver_task, "rf_receiver_task", 2048, (void*) IO_RF_RECEIVER_A, 10, NULL); } /************************************* end RF接信号 ***************************************/ /************************************* begin 雷达感应 ***************************************/ //雷达感应任务 static void radar_sense(void *arg) { ESP_LOGI(TAG, "begin radar sense"); uint16_t num=0; while(true){ // if(is_radar==1 && is_alarm==1){ // if(gpio_get_level(IO_RADAR_OUT)==1){ // if(relay_status==0) { // open_relay(); // led_rgb_blink(255,0,0,100,0,0,3,1000); //红灯闪烁 // } // } // else{ // //超过指定时间后关闭 // if(relay_status==1 && num >5*radar_interval){ // close_relay(); // light_status=0; // led_status(); // num=0; // } // num++; // } // } else if(is_radar==1) { // if(gpio_get_level(IO_RADAR_OUT)==1){ // if(relay_status==0) { // open_relay(); // light_status=1; // led_status(); // } // } // else{ // //超过指定时间后关闭 // if(relay_status==1 && num >5*radar_interval){ // close_relay(); // light_status=0; // led_status(); // num=0; // } // num++; // } // } vTaskDelay(pdMS_TO_TICKS(200)); } } // void radar_cds_enable(void){ // gpio_set_level(IO_RADAR_CDS,1); // } // void radar_cds_disable(void){ // gpio_set_level(IO_RADAR_CDS,0); // } void radar_start(void){ // 初始化射频引脚 gpio_pad_select_gpio(IO_RADAR_OUT); gpio_set_direction(IO_RADAR_OUT,GPIO_MODE_INPUT); gpio_set_pull_mode(IO_RADAR_OUT, GPIO_PULLDOWN_ONLY); // gpio_pad_select_gpio(IO_RADAR_CDS); // gpio_set_direction(IO_RADAR_CDS,GPIO_MODE_INPUT_OUTPUT); // gpio_set_pull_mode(IO_RADAR_OUT, GPIO_PULLUP_ONLY); xTaskCreate(radar_sense,"radar_sense", 2048,NULL,10,NULL); } /************************************* end 雷达感应 ***************************************/